[AF_Refigeration]
[Home] [About_Us] [Profile] [Services] [Contact]


A word about our service facilities - All key maintenance personnel are accommodated within the factory premises to make our services available round the clock. Out-door service vehicles are always on standby to attend to any call at any time

General and technical specifications of insulated panels used in the fabrication of refrigerated containers


  Steel Base   Heavy duty steel base fabricated of 75 X 75 X 6mm MS angles and 100 X 6mm l-beams as cross members bolted to the main chassis with 8 nos. U-Bolts complete with spring washers and double nuts.
  Insulation Material   Rigid injected polyurethane foam
  Pannel Thickness   50/100/150 mm
  Pannel Cladding   Galvanised steel coated with 200 micron white colour PVC
  Mean Bulk Density   40 Kgs/M3
  Mean compressive strength at 10% compression   229.3 Kpa
  Mean compressive modulus   4475 Kpa
  Mean shrinkage
(Heating at 70oc for 24 hours) 		  Length: 0.54%, Width: 0.45%, Thickness:0.29%
  Mean thermal conductivity   0.0223 w/m. K
  Mean longitudinal tensile strength   410 Kpa
  Mean transverse tensile strength   330 Kpa
  Mean volume % of closed cells   97%
  Floor panel   50/100/150 mm thick polyurethane injected panel sandwitched between G.I sheet at the bottom and 12mm thick plywood and top finished with 2mm thick aluminium checkered plates/GRP/M.S/S.S
  Doors   Rear double leaf/Rear single leaf/ Side delivery hinged doors with stainless steel hinges and container type locks.
  Access steps   Rear combination steps and under-run.
  Lights   12/24 V Vapour-proof, corrosion-resistant lights with independent switches
  Reflectors   Triangular type as required by the traffic department
  Refrigration unit   Can be supplied and installed as per clients choice.
  Guarantee   One-year manufacturer warranty.
  Optional at extra cost   Wind Deflector
Rear Safety Guard
Side Safety Guard
Catwalk
12/24V Converter
Partition - Fixed and movable


The management strongly believes that a better price can be offered to our customers without compromising on quality and workmanship. This has been made possible by maintaining constrain on frills and overhead expenses. Thanks to a very family-like relationship between the management and employees, cent per cent loyalty and sincerity is achieved.



Home  |  About Us  |  Services |  Profile |  Contact

©2002 AL Furat Group. All rights reserved.